Saawariya Enterprise Private Limited
Parel, Mumbai, Maharashtra
Call 0804763313982% Response Rate
Send E-mail
| Rated Power | 1.8 kW |
| Directive I/F | General- purpose interface |
| Made in | Japan |
| Model | VVS type |
| Control mode | Position, speed and torque control (Built-in positioning function) |
| Input voltage | 3-phase 200 to 240 V |
| Capacity (kW) | 1.8 |
1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature)
5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000 m
| Rated Power | 50 W |
| Input voltage | Single-phase or 3-phase 200 to 240V |
| Applicable motor rated output [kW] | 0.05 |
| Made in | Japan |
| Model | VC type |
| Control mode | EtherCAT |
| Rated Power | 200 W |
| Input voltage | Single-phase or 3-phase 200 to 240V |
| Mde in | Japan |
| Model | VS type |
| Control mode | Position/ Torque control |
| Command interface | SX bus |
| Rated Power | 200 W |
| RPM: Rated (Max) | D7 |
| Made in | Japan |
| Motor Output [Watt] | 200 |
| Torque | 0.637 |
200 [Watt] ,GYL6 Motor-Brake, 24 bit INC/ABS Encoder, 0.637 Torque , D7 RPM 0.29 Inertia , 1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000 m
| Rated Power | 400 W |
| Made in | Japan |
| Motor Output [Watt] | 400 |
| Torque (Nm) | 1.27 |
| RPM: Rated (Max) | D7 |
400 [Watt] , GYL6 Motor -Brake , 24 bit INC/ABS Encoder, 1.27 Torque , D7 RPM 0.57 Inertia , 1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000 m
| Rated Power | 400 W |
| Voltage | 200 V |
| Encoder | 24-bit INC |
| Brake | Without brake |
| Wire connection | Lead wire |
| Made in | Japan |
| Model | GYE |
| Rated speed | 3000 r/min |
400 [Watt] , GYL6 Motor, 17 bit INC Encoder, 1.27 Torque , D6 RPM 0.50 Inertia , 1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000 m
| Rated Power | 750W |
| Made in | Japan |
| [Watt] | 750 |
| Torque | 2.39 |
| Encoder | ABS |
750[Watt] , GYB7 Motor -Brake , 24 bit INC/ABS Encoder, 2.39 Torque , D7 RPM 1.54 Inertia , 1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000 m
| Rated Power | 750W |
| Model | GYE |
| Voltage | 200 V |
| Encoder | 24-bit INC |
| Made in | Japan |
| Wire connection | Lead wire |
| Brake | Without brake |
750 [Watt] , GYE6 Motor , 17 bit INC Encoder, 2.39 Torque , D6 RPM , 1.53 Inertia , 1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000 m
| Rated Power | 1.8 kW |
| Wire connection | Connnector |
| Model | GYL motor (Medium inertia) |
| Voltage | 200 V |
| Rated speed | 1500 r/min |
| Encoder | 17-bit INC |
1.8KW [Watt] ,GYL6 Motor-Brake, 17 bit INC Encoder, 11.5 Torque , B6 RPM , 27.32 Inertia , 1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000 m
| Rated Power | 750W |
| Control mode | Position, speed and torque control (Built-in positioning function) |
| Directive I/F | General- purpose interface |
| Made in | Japan |
| Capacity (kW) | 0.75 |
| Input voltage | Single-phase or 3-phase 200 to 1 0.1 0.1 RYT101S7-VVS2 0.2 RYT201S7-VVS2 0.4 RYT401S7- |
| Model | VVS type |
1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000 m
| Rated Power | 200 W |
| Model | VVS type |
| Capacity (kW) | 0.2 |
| Made in | Japan |
| Input voltage | Single-phase or 3-phase 200 to 240 V |
| Control mode | Position, speed and torque control (Built-in positioning function) |
| Directive I/F | General- purpose interface |
1 1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dust 9) Altitude Altitude ≤ 1000 m
| Rated Power | 400 W |
| [Watt] | 400 |
| Torque (Nm) | 1.27 |
| Inertia | 0.62 |
| Encoder | ABS |
| Made in | Japan |
| Rated Power | 750W |
| Made in | Japan |
| Torque (Nm) | 2.39 |
| Encoder | ABS |
750 [Watt] ,GYB7 Motor , 24 bit INC/ABS Encoder, 2.39 Torque , D7 RPM , 1.54 Inertia , 1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000 m
| Motor Output [Watt] | 2.9KW |
| Encoder | 17-bit INC |
| Torque (Nm) | 17-bit INC |
| RPM | B6 |
| [Watt] | 2.9KW |
| Made in | Japan |
1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1
2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53)
6) Encoder 24-bit serial encoder (absolute/incremental)
7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus
9) Altitude Altitude ≤ 1000 m
| [Watt] | 1500 |
| Made in | Japan |
| Torque | 4.78 |
| Inertia | 2.67 |
| Encoder | INC |
1500 [Watt] , GYS Motor - Brake , 4.78 (Nm) , 2.67 Inertia , INC Encoder , 1) Degree of enclosure protection Totally enclosed, self-cooled (IP 67, excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminals (encoder) Cannon connector 4) Overheat protection Not provided (The servo amplifier detects temperature.) 5) Mounting method By securing motor flange IMB5 (L51), IMV1 (L52), IMV3 (L53 6) Encoder 24-bit serial encoder (absolute/incremental 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000m
| Made in | Japan |
| [Watt] | 3000 |
| Torque (Nm) | 9.55 |
| Inertia | 8.32 |
| Encoder | ABS |
3000 [Watt] , GYS Motor, 9.55 (Nm) , 8.32 Inertia , ABS Encoder , 1) Degree of enclosure protection Totally enclosed, self-cooled (IP 67, excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminals (encoder) Cannon connector 4) Overheat protection Not provided (The servo amplifier detects temperature.) 5) Mounting method By securing motor flange IMB5 (L51), IMV1 (L52), IMV3 (L53 6) Encoder 24-bit serial encoder (absolute/incremental 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000m
| Encoder | ABS |
| Made in | Japan |
| Torque (Nm) | 12.7 |
| Inertia | 12.9 |
4000 [Watt] , GYS Motorr-Brake , 12.7 (Nm) , 12.9 Inertia , ABS Encoder , 1) Degree of enclosure protection Totally enclosed, self-cooled (IP 67, excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminals (encoder) Cannon connector 4) Overheat protection Not provided (The servo amplifier detects temperature.) 5) Mounting method By securing motor flange IMB5 (L51), IMV1 (L52), IMV3 (L53 6) Encoder 24-bit serial encoder (absolute/incremental 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000m
| Made in | Japan |
| Model | VS type |
| Control mode | Position/ Speed/ Torque control (Built-in positioning function |
| Command interface | General purpose interface |
| Input voltage | Single-phase or 3-phase 200 to 240V |
| Applicable motor rated output [kW] | 0.2 |
| Model | VV type |
| Control mode | Position/ Speed/ Torque control (Built-in positioning function) |
| Command interface | General purpose interface |
| Input voltage | Single-phase or 3-phase 200 to 240V |
| Applicable motor rated output [kW] | 0.1 |
| Made in | Japan |
| Made in | Japan |
| Model | VV type |
| Control mode | Position/ Speed/ Torque control (Built-in positioning function) |
| Command interface | General purpose interface |
| Input voltage | Single-phase or 3-phase 200 to 240V |
| Command interface | SX bus |
| Input voltage | 3-phase 200 to 240V |
| Applicable motor rated output [kW] | 0.75 |
| watt | 750 |
| Made in | Japan |
| Model | VS type |
| Control mode | Position/ Speed/ Torque control |
| Model | VV type |
| Control mode | Position/ Torque control (Built-in positioning function |
| Command interface | General purpose interface |
| Input voltage | 3-phase 200 to 240V |
| Applicable motor rated output [kW] | 0.85 |
| Made in | Japan |
| Command interface | General purpose interface |
| Input voltage | 3-phase 200 to 240V |
| [Watt] | 1000 |
| Made in | Japan |
| Model | VV type |
| Torque | 4.7 |
| Control mode | Position/ Speed/ Torque control (Built-in positioning function |
| Control mode | Position/ Torque contro |
| Command interface | SX bus |
| Input voltage | 3-phase 200 to 240V |
| Applicable motor rated output [kW] | 2.0 |
| Made in | Japan |
| Model | VS type |
| Control mode | Position/ Speed/ Torque control (Built-in positioning function) |
| Command interface | General purpose interface |
| Input voltage | 3-phase 200 to 240V |
| Applicable motor rated output [kW] | 2.0 |
| (Watt) | 1500 |
| Made in | Japan |
| Model | VV type |
| Control mode | Position/ Torque control |
| Command interface | EtherCAT |
| Input voltage | Single-phase or 3-phase 200 to 240V |
| Applicable motor rated output [kW] | 0.75 |
| [Watt] | 750 |
| Made in | Japan |
| Model | VC type |
| Model | VC type |
| Control mode | Position/ Speed/ Torque control |
| Command interface | EtherCAT |
| Input voltage | 3-phase 200 to 240V |
| Applicable motor rated output [kW] | 0.85 |
| Made in | Japan |
| Model | VC type |
| Control mode | Position/ Speed/ Torque control |
| Command interface | EtherCAT |
| Input voltage | 3-phase 200 to 240V |
| Applicable motor rated output [kW] | 0.85 |
| [Watt] | 1000 |
| Made in | Japan |
| Made in | Japan |
| Modell | GYL motor (Medium inertia) |
| Voltage | 200 V |
| Rated speed | 1500 r/min |
| Encoder | 17-bit INC |
| Brake | Without brake |
| Wire connection | Connnector |
| Motor Output [Watt] | 2.4KW |
| Made in | Japan |
| Motor Output [Watt] | 2.9KW |
| Encoder | 17 bit INC |
| Torque | 18.5 |
| RPM: Rated (Max) | B6 |
2.9KW [Watt] ,GYL6 Motor, 17 bit INC Encoder, 18.5 Torque , B6 RPM 45.55 Inertia , 1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000 m
| RPM : Rated (Max) | B6 |
| Made in | Japan |
| Motor Output [Watt] | 2.9KW |
| Encoder | 17-bit INC |
| Torque (Nm) | 18.5 |
2.4KW [Watt] ,GYL6 Motorr-Brake, 17 bit INC Encoder, 15.3 Torque , B6 RPM 49.85 Inertia , 1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000 m
| Encoder | 17-bit INC |
| Torque (Nm) | 18.5 |
| RPM : Rated | B6 |
| Motor Output [Watt] | 2.4KW |
| Made in | Japan |
2.4KW [Watt] ,GYL6 Motor, 17 bit INC Encoder, 15.3 , B6 RPM ,45.55 Inertia , 1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000 m
| Directive I/F | General- purpose interface |
| Input voltage | 3-phase 200 to 240 V |
| Capacity (kW) | 0.85 |
| Made in | Japan |
| Model | VVS type |
| Control mode | Position, speed and torque control (Built-in positioning function) |
1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1
2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53)
6) Encoder 24-bit serial encoder (absolute/incremental)
7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus
9) Altitude Altitude ≤ 1000 m
| Watt | 4.4KW |
| Encoder | 17-bit INC |
| Torque | 28.4 |
| RPM | B6 |
| Made in | Japan |
1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1
2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature)
5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus
9) Altitude Altitude ≤ 1000 m
| Inertia | 0.57 |
| Encoder | ABS |
| Made in | Japan |
| Torque | 1.27 |
400 [Watt] ,GYB7 Motor , 24 bit INC/ABS Encoder, 1.27 Torque , D7 RPM , 0.57 Inertia , 1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000 m
| Wire connection | Connnector |
| Motor Output | 4.4KW |
| Made in | Japan |
| Model | GYL motor (Medium inertia) |
| Voltage | 200 V |
| Rated speed | 1500 r/min |
| Encoder | 17-bit INC |
| Brake | With brake |
4.4KW [Watt] ,GYL6 Motorr-Brake, 17 bit INC Encoder, 28.4 Torque , B6 RPM 69.71 Inertia , 1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000 m
| Made in | Japan |
| Model | VS type |
| Control mode | Position/ Speed/ Torque control |
| Command interface | SX bus |
| Applicable motor rated output [kW] | 2.0 |
| [Watt] | 1500 |
| Rated Power | 200 W |
| Encoder | 24-bit INC/ABS |
| Made in | Japan |
| Torque (Nm) | 0.637 |
| RPM: Rated (Max) | D7 |
| Inertia | 0.26 |
| Motor Output [Watt] | 200 |
200 [Watt] ,GYB7 Motor , 24 bit INC/ABS Encoder, 0.637 Torque , D7 RPM , 0.26 Inertia , 1) Winding insulation class Totally enclosed, self-cooled, IP67 (excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminal (encoder) Cannon connector 4) Overheating protection Not provided (The servo amplifier detects temperature) 5) Mounting method Flange mounting IMB5 (L51), IMV1 (L52), IMV3 (L53) 6) Encoder 24-bit serial encoder (absolute/incremental) 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000 r/min: V15 or below 8) Installation place, environment For indoor use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000 m
| Rated Power | 400 W |
| Model | VC type |
| Control mode | Position/ Torque control |
| Made in | Japan |
| Input voltag | Single-phase or 3-phase 200 to 240V |
| Applicable motor rated output [kW] | 0.4 |
| Command interface | EtherCAT |
| Rated Power | 400 W |
| Torque (Nm) | 12.7 |
| Inertia | 10.8 |
| Encoder | INC |
| Made in | Japan |
| Output [Watt] | 4000 |
4000 [Watt] , GYS Motor, 12.7(Nm) , 10.8 Inertia , INC Encoder , 1) Degree of enclosure protection Totally enclosed, self-cooled (IP 67, excluding the shaft sealing)*1 2) Terminals (motor) Cannon connector 3) Terminals (encoder) Cannon connector 4) Overheat protection Not provided (The servo amplifier detects temperature.) 5) Mounting method By securing motor flange IMB5 (L51), IMV1 (L52), IMV3 (L53 6) Encoder 24-bit serial encoder (absolute/incremental 7) Vibration level*2 Up to rated rotation speed: V10 or below Over rated rotation speed and up to 5000r/min: V15 or below 8 )Installation place, environment For indr use (free from direct sunlight), locations without corrosive and flammable gases, oil mist and dus 9) Altitude Altitude ≤ 1000m